- Home
- About KEDA
- Corporate Culture
-
Products
Master the core bonding technology
Professionalism: deep plowing bonding technology to achieve the same life of adhesives and buildings.
altruism: the global strict selection of raw materials and the construction of national formula library, the source to ensure quality.
Long-term doctrine: one-time bonding, life-long peace of mind, with technical ingenuity to protect the life of the building, enabling sustainable development. - Cases
- Shibilao Dry Adhesive
- Cooperation
- Careers
Planting Adhesive
-
Main features
-
- Can be used for planting screw connection
- Strong connection
- Strong adhesion
- Excellent fixing force
-
Product Certification
-
-
-
Product Specifications
-
- 4L
-
Executive standards
-
- JGJ 145-2013 Technical Specification for Post-Anchorage of Concrete Structures
Product overview
Keda planting glue mud for Wuhan Keda marble care materials Co., Ltd. carefully developed and fully to the market of high-quality products, suitable for all kinds of building structures in the steel bar embedding and anchor bolt anchoring, engineering building reinforcement, all kinds of equipment foundation anchoring, anchoring, its good deployment, curing fast, high strength, quality stability, can be assured to use
Product characteristics
|
Characteristic one:
|
The composition is special grade (vinyl ester) resin for civil engineering structure, alkali resistance (concrete is alkaline), high drawing force
|
Characteristic two:
|
Strong thixotropy, no vertical leakage during ceiling and vertical wall operation, all directions can be constructed
|
|
Characteristic three:
|
Concrete, rock disc, ALC, hollow materials and other almost all kinds of substrates can be applied
|
Characteristics four:
|
Use a wide range of temperature,-5 ℃ ~ 40 ℃ can be construction
|
|
Feature five:
|
No expansion stress fixed, small edge spacing
|
Characteristics of six:
|
Fast installation, rapid solidification, shorten the construction progress, save working hours
|
|
Characteristic seven:
|
Hard shrink packaging, unused planting glue can be used again, no waste
|
||
Scope of application
1. Unreserved rebar planting and fixed Anka
2. old buildings, reconstruction, beam and column expansion, structural reinforcement or engineering changes used
3. the penetration of concrete bonding is excellent, the bonding force of steel, can make the steel strong fixed in the concrete.
4. can be used for beam column, floor, retaining wall, continuous wall and other planting bar engineering
5. Planting screw, structural connector
Construction operation
1. Loosen the screw cap and pull out the plug sleeve at the material outlet
2. Screw the static mixeron the material outlet
3. Prepare the rib planting gun. Push and pull the bar planting gun to the fully open position
4. Install the planting bar glue on the planting bar gun
5. Inject appropriate amount of resin into the reinforcement hole, and then implant the reinforcement.
Precautions
1. Thoroughly clean the drilling
2. Rod body rotates into
3. The initial glue cannot be used
4. When the colloid is not completely cured, it is strictly prohibited to touch the rod body
5. When the work is interrupted for a long time, the static mixing pipe headmust be replaced again.
6. The colloid curing time is directly related to the ambient temperature (25 ℃,40 minutes curing
Related Products
WeChat Channels
TikTok
