Keda waterproofing agent is Wuhan Keda Yunshi Care Material Co., Ltd. carefully developed and fully market a product used to protect the stone surface, with waterproof, acid and alkali resistance, anti-pollution and other functions, but also to prevent stone weathering, freeze-thaw damage and other issues

apply granite, marble, sandstone, limestone, masonry, concrete, etc stone

1. primary treatment: can be used natural drying or low temperature baking stone surface, so that dry
2. Stirring: Dilute according to instructions and stir well
3. Brush: can choose to spray, brush, roll or soak. The soaking effect is usually better. Be sure to be sufficient and uniform to ensure that the stone
4. The surface is fully wetted. It is recommended to brush twice, and the cross method can be used between the two times.
5. Full maintenance: After construction, it is necessary to ensure sufficient maintenance time to allow the waterproofing agent to fully penetrate and cure. During the period should avoid contact with water, rain, dust
6. Acceptance: water splashing test is used to observe whether the water drops show lotus leaf effect.

1. Ensure that the humidity of the construction environment is low, avoid construction under hot sun, rainy days, freezing or strong winds (above level 6), and be free from rain and snow within 24 hours after construction
2. It is strictly forbidden to directly construct on the stone with coating, wax stain or oil stain on the surface
3. After brushing, remove the residual liquid on the surface in time to prevent the formation of white spots or stains after drying.
4. Avoid contact with eyes and skin: If accidentally into the eyes, immediately rinse with plenty of water and seek medical attention. No swallowing
5. Place in a place where children cannot reach