- Home
- About KEDA
- Corporate Culture
-
Products
Master the core bonding technology
Professionalism: deep plowing bonding technology to achieve the same life of adhesives and buildings.
altruism: the global strict selection of raw materials and the construction of national formula library, the source to ensure quality.
Long-term doctrine: one-time bonding, life-long peace of mind, with technical ingenuity to protect the life of the building, enabling sustainable development. - Cases
- Shibilao Dry Adhesive
- Cooperation
- Careers
SHIBL Standard Marble Adhesive
-
Main features
-
- Good adhesion
- Easy to reconcile
- Fast curing
- Good aging resistance
- No oil leakage
- Anti-sagging
- High cost performance
-
Product Certification
-
-
-
Color
- Transparent
- Beige
- White
- Black
- Red
- Green
- Super White
-
Product Specifications
-
- 0.6L
- 0.7L
- 0.8L
- 1L
- 3L
- 4L (Value Pack)
- 4L
- 18L
-
Executive standards
-
- Industry Standard: JC/T 989-2016 "non-structural bearing stone adhesive"
- Environmental Protection standard: GB 18583-2008 "limit of harmful substances in adhesives for interior decoration materials"
- Enterprise Standard: Q/WKD 002-2022 "stone adhesive for non-structural bearing (marble glue)"
Product overview
This product it is carefully developed and fully marketed by Wuhan Keda Yunshi Care Material Co., Ltd. Standard type of product. It is suitable for fine seam bonding and low temperature construction, with delicate and easy to reconcile, transparent adhesive curing transparency moreHigh, stone wire bonding grinding is not easy to fall off, no sagging, no oil leakage and other advantages. it is suitable for higher cost of decoration engineering and stone processing of
Product characteristics
|
Physical Properties:
|
Fine and easy to reconcile, good thixotropy, easy to polish after curing
|
Mechanical properties:
|
Good adhesion
|
|
Weather resistance:
|
good weather resistance
|
Environmental safety:
|
Limit Detection of Harmful Substances in Adhesives for Interior Decoration Materials (GB 18583-2008)
|
|
Construction performance:
|
Room temperature curing time faster, fully cured up to the use of strength, easy to operate
|
||
Scope of application
is widely used in building stone, ceramic, vitrified brick rapid positioning and parquet, repair and bonding
Construction operation
1. the surface to be treated should be clean, completely dry and slightly rough
2. in100 add to the colloid2-3 part of curing agent
3. mix the two components fully and evenly, and apply the glue knife to the surface to be treated.
Precautions
1. do not put the remaining glue back into the tank after mixing.
2. place in a cool place and close the lid tightly after use.
3. the adhesive is not recommended for structural bonding such as stone dry hanging
4. it is not suitable for construction in humid places. If the air humidity is too high, it will cause the colloid surface to stick to hands.
5. construction temperature is not appropriate below-10℃ higher40℃
6. bonding site do not frequent contact with wet and cold frost
7. The marble glue shall be used and fixed within the operable time. Once the initial setting is found, please do not continue to use it.
8. marble glue25 the initial setting time at ℃ is about3-6minutes, with the temperature rise to shorten, with the temperature drop to extend the of, if you need to extend or shorten the operation time, can be appropriate to reduce or to increase the proportion of curing agent, it is recommended to adjust the sample test time before construction
9. at low temperatures, recommend use my factory winter curing agent, accelerate the curing process
Related Products
WeChat Channels
TikTok
