- Home
- About KEDA
- Corporate Culture
-
Products
Master the core bonding technology
Professionalism: deep plowing bonding technology to achieve the same life of adhesives and buildings.
altruism: the global strict selection of raw materials and the construction of national formula library, the source to ensure quality.
Long-term doctrine: one-time bonding, life-long peace of mind, with technical ingenuity to protect the life of the building, enabling sustainable development. - Cases
- Shibilao Dry Adhesive
- Cooperation
- Careers
Hercules High Quality Marble Glue
-
Main features
-
- High Strength Bonding
- Feel Delicate
- Convenient Construction
- Fast Curing
- Good Aging Resistance
- No Oil Leakage
- Anti-sagging
-
Product Certification
-
-
-
Color
- Transparent
- Beige
- White
- Black
- Red
- Green
- Super White
-
Product Specifications
-
- 0.6L
- 0.7L
- 0.8L
- 1L
- 3L
- 3.5L
- 4L
- 20L
-
Executive standards
-
- Industry Standard: JC/T 989-2016 "non-structural bearing stone adhesive"
- Environmental Protection standard: GB 18583-2008 "limit of harmful substances in adhesives for interior decoration materials"
- Enterprise Standard: Q/WKD 002-2022 "stone adhesive for non-structural bearing (marble glue)"
Product overview
This product it is a high-quality product carefully developed and fully marketed by Wuhan Keda Yunshi Care Material Co., Ltd. It is suitable for fine seam bonding and low temperature construction, with fine and smooth pole easy to reconcile, transparent adhesive curing high transparency, stone line bonding grinding is not easy to fall off, no sagging, no oil leakage and other advantages. It is suitable for decorative engineering and stone processing requiring high-end quality
Product characteristics
|
Physical Properties:
|
Smooth and delicate, easy to reconcile, good thixotropy, easy to polish after curing
|
Mechanical properties:
|
high strength bonding
|
|
Weather resistance:
|
Excellent weather resistance
|
Environmental safety:
|
Limit Detection of Harmful Substances in Adhesives for Interior Decoration Materials (GB 18583-2008)
|
|
Construction performance:
|
Room temperature curing time faster, fully cured up to the use of strength, easy to operate
|
||
Scope of application
is widely used in building stone, ceramic, vitrified brick rapid positioning and parquet, repair and bonding
Construction operation
1. the surface to be treated should be clean, completely dry and slightly rough
2. in100 add to the colloid2-3 part of curing agent
3. mix the two components fully and evenly, and apply the glue knife to the surface to be treated.
Precautions
1. do not put the remaining glue back into the tank after mixing.
2. place in a cool place and close the lid tightly after use.
3. the adhesive is not recommended for structural bonding such as stone dry hanging
4. it is not suitable for construction in humid places. If the air humidity is too high, it will cause the colloid surface to stick to hands.
5. construction temperature is not appropriate below-10℃ higher40℃
6. bonding site do not frequent contact with wet and cold frost
7. The marble glue shall be used and fixed within the operable time. Once the initial setting is found, please do not continue to use it.
8. marble glue25 the initial setting time at ℃ is about3-6minutes, with the temperature rise to shorten, with the temperature drop to extend the of, if you need to extend or shorten the operation time, can be appropriate to reduce or to increase the proportion of curing agent, it is recommended to adjust the sample test time before construction
9. at low temperatures, recommend use my factory winter curing agent, accelerate the curing process
Related Products
WeChat Channels
TikTok
