- Home
- About KEDA
- Corporate Culture
-
Products
Master the core bonding technology
Professionalism: deep plowing bonding technology to achieve the same life of adhesives and buildings.
altruism: the global strict selection of raw materials and the construction of national formula library, the source to ensure quality.
Long-term doctrine: one-time bonding, life-long peace of mind, with technical ingenuity to protect the life of the building, enabling sustainable development. - Cases
- Shibilao Dry Adhesive
- Cooperation
- Careers
Hercules High Quality Dry Hanging Glue
-
Main features
-
- Super Bonding
- Stable quality
- Excellent weather resistance
- colloid delicate
- good reconciliation
-
Product Certification
-
-
-
Product Specifications
-
- 1L
- 5L
- 10L
-
Executive standards
-
- Industry Standard: JC 887-2001 "dry hanging stone curtain wall with epoxy adhesive"
- Environmental Protection standard: GB 18583-2008 "limit of harmful substances in adhesives for interior decoration materials"
- Enterprise Standard: Q/WKD 001-2022 Stone Dry Hanging Adhesive
Product overview
This product it is carefully developed and fully marketed by Wuhan Keda Yunshi Care Material Co., Ltd. High quality dry hanging adhesive. It is suitable for stone, ceramic, artificial stone back plate bonding; color yellowish curing completely corrosion-free, safereliable, can be assured to use
Product characteristics
|
Physical Properties:
|
Smooth and delicate, easy to reconcile, light color, good thixotropy
|
Mechanical properties:
|
Super bonding, good toughness
|
|
Weather resistance:
|
Excellent water resistance, chemical resistance, excellent weather resistance
|
Environmental safety:
|
Pass the limit test of harmful substances in adhesives for interior decoration materials (GB 18583-2008) and pass the certification.
|
|
Construction performance:
|
Normal temperature surface drying time is moderate, fully cured up to the use of strength, easy to operate
|
||
Scope of application
1. stone paste dry hanging; Old wall without digging re-paste renovation; Timber home tools permanent bonding
2. suitable for stone, wood, steel, iron, copper, aluminum, stainless steel, concrete, cement prefabricated parts, clay brick, glass fiber reinforced plastic, artificial stone and other different materials of mutual bonding
3. Bonding of reinforced concrete building structures. Bonding steel reinforcement, joint filling, repair, sealing, etc.
Construction operation
1. clean the surface to be bonded to make it dust-free, oil-free, rust-free and water-free, and ensure that the surface to be bonded has sufficient strength and certain roughness.
2. Mix components A and B according to the mass ratio of 1:1, turn over and stir until they are completely uniform.
3. glue with scraper or other special tools
Precautions
1. the pasting base surface shall be firm and solid, without floating ash and open water., when there is release agent on the concrete base surface, it should be treated in advance., derusting treatment shall be done when there is rust on the metal base surface.; if the pasting surface is too smooth, rough treatment must be made.
2. A, B two-component should be by weight ratio1:1 mix and adjust the glue first, bonding construction
3. the paste area per square meter of the plate should not be less104cm ², with a thickness of not less than 3mm
4. initial curing stage of dry hanging adhesive, cannot carry heavy load
5. the construction temperature is lower5℃, can be heated in the adhesive area, but not higher65℃
6. when welding installation is required during construction, the welding spot shall be away from the adhesive paste.3cm above
7. it is forbidden to adjust glue on the bonding surface., otherwise, it will affect the bonding effect.
Related Products
WeChat Channels
TikTok
