Raytheon KD500 is a professional polyurethane foam filler for doors and windows, which has the advantages of high hardness, high toughness, strong adhesion, large amount of foaming, etc. It is suitable for fixing, bonding, installation, sound insulation, heat preservation, sealing, etc. between door frame, window and wall, indoor structure vacancy, engineering hole deficiency, crack gap filling, etc.

is suitable for door frames and windows and walls between the fixed, bonding, installation, sound insulation, heat preservation, sealing, etc., indoor structure vacancy, engineering hole, crack gap filling, etc.

1. Before use, shake the tank up and down evenly for one minute
2. Before construction, clean the filling part and spray it with water
3. Gun type: turn the material tank upside down and rotate and fix it on the spray gun connection port, open the spray gun valve counterclockwise, and adjust the flow rate
4. Tube type: install the plastic nozzle on the thread of the valve of the positive material tank, and then press the nozzle after inverting the material tank to useit.
5. From bottom to top during injection, the injection volume can be1/2 of the required filling volume.
6. about ten minutes surface began to cure, wait for an hour to further processing
7. you can use a knife to smooth, and then use cement, paint, paint for surface treatment

Please keep the tank out of reach of children
Prohibit piercing or burning empty cans
after use It is forbidden to be close to open flame or contact with inflammable and explosive materials, and it is forbidden to heat
the product at will. Do not store in other environments where the temperature exceeds 50°C.
This product may produce flammable gas mixture during use, so the construction site should have ventilation conditions. Wear protective gloves and goggles
during construction If ventilation is poor, wear breathing equipment
If the foam touches the eyes or skin, wash it immediately with soap and water; if you feel unwell, go to the hospital
immediately Should be placed in a dry and cool place, avoid direct sunlight. Do not store in a humid environment to avoid iron cans due to corrosion caused by leakage
During storage and transportation, the product must be placed upright, it is strictly forbidden to put it upside down or on its side, and it is forbidden to put it in the cab.