Keda Anti-Slip Adhesive is a viscous paste-like solvent-free two-component epoxy resin adhesive, which can replace traditional copper anti-slip strips. It has the characteristics of easier construction, more beautiful appearance, and less pollution.
This product is mainly used in natural stone (marble, limestone, granite), concrete stone or ceramic tile to make non-slip surface, mainly used in stone and ceramic stairs, slopes and entrances where there is water and easy to slip.
1.High adhesion and abrasion resistance
2.Support relatively long construction period
3.The hardening process shrinks very little,and the bonding layer has good dimensional stability.
4.Good weather resistance and aging resistance (water resistance, chemical resistance, acid resistance, alkali resistance, oil resistance)
5.Flexible and easy to color, various color surfaces can be matched.
6.Color: white, gray, black, beige, yellow, green, red, pink, brick red and other colors. We can also mix the colors according to the color samples provided by customers.
1L per plastic can
1.Plastic Tube Packaging
(1)Without mixing mouth: Mix the two components thoroughly.
(2)When using a mixing nozzle: The two components are thoroughly mixed in the mixing tube.
(3)Completely remove the dirt on the surface of the stone and rough the surface slightly.
(4)Remove the button on the hose, insert the rubber barrel into the glue gun, squeeze the glue gun until there is material from the two outlets. Put on the mixing nozzle. The applied product forms a coating with a thickness of at least 1mm and at most 2mm. Use a spatula to scrape the excess material directly onto the tape. After using the product for 10 minutes, remove the tape.
(5)The working time of the mixture is 100~120min (20℃/60℉), about 3~8 hours (20℃/68℉), it can be surface-dried, and it can be pedaled after 12-16 hours. It takes about 7 days to fully harden and stabilize Time (20°C/68°F).
(6)The curing speed can be controlled by controlling the temperature, using heat to accelerate or cold to decelerate.
(7)The construction tools can be cleaned with specific solvents.
(8)Store properly after use, and be careful when discarding this product.
(9)The shelf life is one year in a cool and ventilated place.
(1) Completely remove the dirt on the surface of the stone and rough the surface slightly.
(2) Mix the two-component glue 2:1 (by weight) thoroughly until the color is uniform.
(3)Use professional tape to make a mark and leave an appropriate width. Squeeze the mixture evenly between the two parallel tapes, use a spatula to evenly level the rubber, and apply the product to form a coating of at least 1mm and 2mm thick. Use a spatula to scrape the excess material directly onto the tape, and remove the tape after 10 minutes.
(4)The working time of the mixture is 100~120min (20℃/68℉), about 3~8 hours (20℃/68℉), it can be surface-dried, and it can be pedaled after 12~16 hours. It takes about 7 days to fully harden and stabilize Time (20℃/68℉).
(5)The hardening speed can be controlled by temperature, with heat acceleration or cold deceleration.
(6)The construction tools can be cleaned with solvents.
(7) Store properly after use, and be careful when discarding this product.
(8) The shelf life is one year in a cool and ventilated place.