Granite Rust Remover

　　Product introduction: This product is an acid cleaning solvent, used at room temperature, can effectively infiltrate into stone hole to remove and neutralize rust, water, oil, metal oxide, impurities, etc. Double effect, remove oil and stain, lasting effect, eliminate rust, never damage the surface luster of hemp stone.

　　Range Of Application: Mainly used for acid resistant natural granite, artificial stone, ceramic tile iron stains, quick and easy removal of rust, stains and surface oil. The rust metal compounds inside the granite were replaced.

　　Product Feature:

　　1, granite rust solvent is a kind of acid cleaning solvent, with good oxidation performance, used at general room temperature.

　　2. Cleaning solvent can remove and neutralize rust, water stain, oil stain, metal oxide and impurity when it penetrates into stone hole.

　　3. With double effect, it can remove oil stains on the surface, remove rust and remove stubborn stains by going deep into the inner layer and deep layer of stone, and it will not leave any pigment and impurities in the stone, which has no side effect on the stone surface.

　　4. Especially suitable for any polished and burnt granite. It can also be used in brick, tile, plastic, etc. Does not damage the granite surface. To achieve long-term protection. For the United States white hemp, California drilling hemp, such as special effects, do not rust after use.

　　Technical Specification:

　　1. Appearance: colorless transparent liquid

　　2. Density: about 1g/cm3

　　3. PH value: about 1

　　Method Of Application:

　　1. Directly spray on the surface of iron stains or stains, wash with water after 5 minutes.

　　2. Granite deep rust decontamination: with clean white cloth or cotton on the stone, wet penetration for a few minutes.

　　3. Repeat for better effect.

　　Caution:

　　1. Wear gloves when using.

　　2. Keep away from children.

　　3. Do not use on the marble surface, so as not to damage the surface luminosity.

　　Package: 1 L/plastic bottle