Chemical Building Materials
F-2 Water-Borne Waterproofing Solvent
Product introduction: This product is water-based emulsion water-proofing solvent, non-toxic, tasteless, not polluting the surrounding environment, can infiltrate stone wool stoma and stone achieve chemical combination, the formation of breathable waterproof barrier. Long waterproof life, good recoating, can be used on slightly wet surface.
Range Of Application: Suitable for all kinds of marble, granite six - sided protection use. Basically do not change the appearance of stone.
1. This product is a microemulsion of organosilane and siloxane complex
2. F-2 stone protective solvent is a water-based environmental protection product with low organic volatiles, non-toxic, tasteless and non-polluting surrounding environment. This product has good wear resistance and good air permeability. Can effectively infiltrate stone wool stoma and stone achieve chemical combination, the formation of breathable waterproof barrier, does not change stone color and appearance. Long waterproof life, good recoating, can be used on slightly wet surface.
3. The dosage varies according to the stone material, generally about 20㎡ for each kilogram of F-2.
Package: 4 L/plastic pot
Method Of Application:
1. Thoroughly clean the substrate;
2. Apply f-2 evenly on the surface (with a fine brush or spray gun);
3. Dry the stone naturally and keep the stone away from water molecules within 24 hours (reaction time between the protective solvent and stone).
1. After use, tighten the cap to avoid solvent volatilization and moisture in the air affecting the use effect.
2. Keep the construction environment well ventilated and no fireworks.
3. Avoid contact with skin and clothes. In case of accidental contact with skin or wet clothes, please rinse with running water as soon as possible.
Address：Zhangbai Road,Dongxi Lake District,Wuhan
Copyright @ Wuhan Keda Marble Protective Materials Co.,Ltd .All rights reserved 鄂ICP备19000000号 Powered by：300.cn