Automatic stone polishing solvent
Product introduction: This product is a solvent - based one - component stone brightener. Protect stone, increase brightness, weather resistance, not easy to yellow.
Range Of Application: Suitable for any stone, marble, granite, artificial stone, etc. It works better on marble
1. Automatic polishing solvent can form a strong adhesive and transparent protective film on the stone surface. This protective film can make the stone surface bright, smooth, gloss can reach more than 90, and can achieve the same effect with the polishing machine polishing luminosity.
2. Since the main absorption peak of the resin used in this product is outside the range of solar spectrum, the coating film produced has excellent light resistance and outdoor aging resistance. In the ultraviolet radiation, has the relative stability, will not turn yellow.
3. It is suitable for the matte parts that are hard to be polished, such as stone line, stone edge, cylinder junction, dark corner, periphery, stair railing, curve and handicraft, protective layer of tea table and sandstone surface layer, which can produce high brightness.
4. Easy to operate, just brush, paint and spray, and dry naturally. Depending on the ambient temperature and dosage, the film drying time is 10-60 minutes.
Package: 4 L/plastic pot
Method Of Application:
1. The surface to be treated must be clean and dry without any coating.
2. Brush, roller, spray and cloth can be used to evenly spread the stone surface. Depending on the ambient temperature and dosage, the film drying time should be 10-60 minutes.
3. After the first layer is completely dry, the second layer can be applied to increase its brightness.
1. Wear gloves when in use, and use them in the air circulation area.
2. Keep away from the fire source. After use, please cover and tighten it, and keep away from children.
3. It is recommended to make a sample before use. If the effect is satisfactory and there are no side effects, it can be fully used.