Stone Jointing Adhesive
KEDA marble adhesive is a special gouge glue for stone floor. It is suitable for the whole ground grinding, retreading and polishing of stone. It is mainly used for the seamless treatment of stone floor.
1, using high purity, stability, high-quality raw materials developed, after fine, strict management and control, with excellent quality.
2, suitable for stone floor seamless processing.
3, high strength and stable storage characteristics, polished with natural stone luster.
4. Seven colours including transparent, dark, light, white, black, red and green, and 12 colour palettes are available.
5. Keep in a cool, well ventilated place out of the sun.
6, the product quality is good, may substitute the import product, reduces the cost .
1, using the world's top resin manufacturing
2, good air-drying, it is not easy to stick to hand;
3, easy to reconcile, can be into fine cracks;
4, good flexibility, not easy to crack;
5, High Resin Content, high polishing brightness;
6, Curing Time Is Short, high construction efficiency;
7, no color, no yellowing, low shrinkage;
8, good aging resistance, not easy to fall off and collapse;
9, good permeability, can replace imported products, reduce costs.
1L, 4l, 19L
1, the surface to be treated to be clean, completely dry and slightly rough.
2. Add 2-3 parts of hardener to 100 parts of COLLOID.
3. Mix the two ingredients thoroughly and evenly, and apply the mixture to the surface to be treated with a mixing knife.
1.Do not put the remaining glue back into the jar after mixing
2.If you want to speed up or slow down the drying rate of the glue, more or less curing agent can
3.please remember to put the glue in a cool place, please close the cover after use.
4, the surface to be bonded should be clean and dry, on the contrary, it will cause poor bonding or peeling.